Description
Please read all instructions before commencing installation even if you feel your are quite familiar with this type of product.
This Heat Light Fan must be installed to comply with New Zealand wiring rules AS/NZ3000:2000 or latest edition thereof.
A licensed Electrician is required to connect and install this unit to the mains supply.
Parameter
| Specific Item | Parameter | |
|
|
Heater Fan Power |
40W |
|
PTC Heater Max Levels |
1000W |
|
|
|
Exhaust Performance |
106 l/s，380m³/hr |
|
Exhaust Fan Power |
40W |
|
|
|
Light |
18W |
|
Colour Temperature |
6500K |
|
|
|
Unit Size |
630mm×160mm×347mm |
|
Cut Out Size |
190mm*510mm |
|
|
Install Depth |
100mm |
|
|
Rated Voltage |
AC230V |
|
|
Total Wattage |
1098W |
|
|
IP Rating |
IP20 |
Caution:
- The temperature of the heater is high, and it is not allowed to be close to curtains or other flammable materials, and it is strictly prohibited to cover it in
- Please do not directly touch the air outlet of the air heater when
3.A double-break switch with a breaking distance of not less than 3mm and a rated current of 10a must be added to the wiring line (completed by a professional electrician)
- The heater shall not be directly placed under the fixed socket, and the heater can only be installed ho- rizontally, not on an inclined plane.
- When using this product in the bathroom, the switch should be installed in a place where people in the bathtub or shower area can not touch and effectively prevent water
- This product is strictly prohibited to be installed in the place with water
- When the internal wiring of the appliance is damaged, it must be completed by the manufacturer or its maintenance department or similar full-time personnel in order to avoid
- In case of any abnormal condition during operation, the power supply shall be cut off immediately, and the local agent or special maintenance point of the enterprise shall be notified to deal with
- Do not use lighting fixtures in series with
- Products shall not be installed in places with corrosive fumes and high temperatures. After installation, the product must be well grounded.
12.Gloves must be worn during installation. If finger marks or stains are left carelessly, detergent can be used to clean them with water.
WARRANTY
The original purchaser of the Bathroom heater is provided with the following warranty subject to the following conditions. The HLFLED3 bathroom heater is warranted against defects in manufacturing and workmanship for a period of 1 years.
Warranty Conditions:
This warranty is only valid for appliances installed according to the manufacturer’s instructions.
Warranty will only be provided where proof of purchase is provided, for example original invoice. This appliance must be installed by a qualified electrical contractor, or person authorised under.
legislation to work on the fixed wiring of any electrical installation. Warranty will only be provided where proof of qualified electrical installation is provided. E.g. Electrical Safety Certificate.
The appliance must not be altered or modified in any way. This appliance is not intended for use by children or the infirm.
The warranty does not extend to the heat or light globes supplied with this unit, or the installation of the unit or any associated wiring or any damage caused by installation or wiring.
Please keep and present the original invoice to your service agent for warranty services. This warranty does not cover damages or less caused by:
1, Any consequential losses arising from incorrect installation or operation and maintenance of
this product.
2, Any consequential losses arising from incorrect wiring of this product.
3, Any modifications or changes made to the unit, other then those recommended by the manufacturer.
4, Any damage caused through lack of regular maintenance such as cleaning.
